Suppose you have just found an oil field which has approximate dimensions of 10000 ft by 10000 ft by 125 ft. The average porosity of the rock is estimated to be 0.2. Assume that the fluid trapped in the pore space is 70% oil and 30% water. Calculate the OOIP contained in the reservoir in barrels of oil. [2 pt] b. You decide to produce the oil using only primary recovery methods. Approximately how many barrels of oil can be recovered? State what assumptions you make. [2 pt] c. Suppose you collect all of the oil in part b in 25 years. How many barrels of oil are produced per day on average? A barrel of crude oil today is worth approximately $96 dollars. Using this value, what would be the average daily revenue of this field? [2 pt] d. Do you think that our estimate of the average revenue…
Category: Engineering
An experiment on the effect of liquid velocity, v towards mass transfer coefficients has been carried out for a specific membrane separation process, in which mass transfer coefficients are found to be approximately proportional to v0.75.
Gas mixtures recovered from different streams of cracking operations are shown in TABLE Q1. The fuel gas mixtures can be fed to a furnace to provide internal heat utility for the process plant.
Water in the 15-in diameter concrete drain pipe runs full with a flow of Q = 15 ft3/s. The pipe is horizontal. Take f = 0.07 and 18 ft .
Water in the 15-in.diameter concrete drain pipe runs full with a flow of Q = 15 ft3/s. The pipe is horizontal. Take f = 0.07 and 18 ft . The specific weight of water is 62.4 lb/ft3. Determine the pressure drop from point A to point B Solved by verified study co-pilot All Study Co-Pilots are evaluated by Gotit Pro as an expert in their subject area. Get Solution Contact Us Student review: (43 ratings) 43 out of 43 people found this solution helpful.
The 700-N force is applied to the 100-kg block, which is stationary before the force is applied. Determine the magnitude and direction of the friction force F exerted by the horizontal surface on the block.
The 700-N force is applied to the 100-kg block, which is stationary before the force is applied. De- termine the magnitude and direction of the friction force F exerted by the horizontal surface on the block. Solved by verified study co-pilot All Study Co-Pilots are evaluated by Gotit Pro as an expert in their subject area. Add to Solution Cart Contact Us
The velocity of a particle along the s-axis is given by v=5s^(3/2), where s is in mm and v is in mm/s. If the particle starts from rest, determine the acceleration when s is 2 mm. Express answer in mm/s^2.
The velocity of a particle along the s-axis is given by v=5s^(3/2), where s is in mm and v is in mm/s. If the particle starts from rest, determine the acceleration when s is 2 mm. Express answer in mm/s^2. Solved by verified study co-pilot All Study Co-Pilots are evaluated by Gotit Pro as an expert in their subject area. Get Solution Contact Us
Determine the uniformly distributed plastic collapse load q for the regular octagonal (i.e., having 8 sides of equal length) steel floor plate, with circumscribed radius r.
Determine the uniformly distributed plastic collapse load q for the regular octagonal (i.e., having 8 sides of equal length) steel floor plate, with circumscribed radius r. The slab has fixed edges, as is shown in Fig. 1. Solved by verified study co-pilot All Study Co-Pilots are evaluated by Gotit Pro as an expert in their subject area. Get Solution Contact Us