Description
Planning is a quintessential bedrock of any program in the professional world. IT and cybersecurity are no different in this foundation. We plan for the worst and hope for the best.
For College of Science, Engineering, and Technology students enrolled in the course, this assignment will be Phase 1 in the creation of your "Programmatic Business Continuity Plan Project” that will be completed in stages throughout your programmatic courses. The project will be finalized and submitted in CYB-690 or ITT-660, depending on your major. Review “Business Continuity Plan (BCP)” and the topic Resources for details about the project.
As you begin the project, it is important to select an industry that is of interest to you. You may select virtually any industry including retail, education, telecommunications, health care, finance, etc. Create a fictional business within this industry to be the basis for your project. As you develop your project, imagine yourself in the role of the Chief Intelligence Officer for Master of Science in Information Technology and MBA in Cybersecurity students, or the Chief Information Security Office for Master of Science in Information Assurance and Cybersecurity and Master of Science in Cybersecurity students.
In this assignment, complete the first stage of our Business Continuity Plan (BCP) by developing the primary outline for a BCP to identify key aspects of the organization.
It is important to remember that according to the definition provided in ISO 32302, a BCP is “documented procedures that guide organizations to respond, recover, resume, and restore to a pre-defined level of operation following a disruption.”
Review the topic Resources associated with ISO 27001 and NIST SP 800-53 and conduct your own research about each to prepare for this assignment.
Reference the “FEMA Small Business Continuity Plan Template” and “Risk Assessment Matrix” located in the topic Resources to complete the assignment. The FEMA template can be used but copying and pasting any section of the document for the assignment constitutes plagiarism and will be treated as such. Use your own words when filling out each section of the BCP.
Develop the Phase 1 content for your company’s BCP. Phase 1 should include all the following:
- Executive Overview: Be precise and detailed and provide a detailed understanding of the program.
- Document Change Control: Chart should be completed.
- Introduction: Include the Overview, Plan Scope, and Applicability that evaluates the appropriateness of cybersecurity frameworks for developing a cybersecurity program to align with business needs, Plan Objectives, and Plan Assumptions.
- Risk Assessment Matrix Template: Complete the “Risk Assessment Matrix Template” provided as this element is not shown in the sample BCP template.
- Critical Business Functions Overview: Detail components that are critical to business operations and provide a clear understanding of what the program is designed to address.
- Company Organizational Chart: Create your own as this is not shown in the sample template. Include the following key positions: CEO, CFO, CIO, CISO, and COO.
Submit the BCP including the completed “Risk Assessment Matrix Template” and Company Organizational Chart.
Note: Retain a copy of this assignment for the Business Continuity Plan, which will be finalized and submitted in either CYB-690 or ITT-660, depending on your major.
Support the BCP with a minimum of three scholarly resources.
While APA style is not required for the body of this assignment, solid academic writing is expected, and documentation of sources should be presented using APA formatting guidelines, which can be found in the APA Style Guide, located in the Student Success Center.
This assignment uses a rubric. Review the rubric prior to beginning the assignment to become familiar with the expectations for successful completion.
You are required to submit this assignment to LopesWrite. A link to the LopesWrite technical support articles is located in Class Resources if you need assistance.
This benchmark assignment assesses the following programmatic competencies:
MBA Cybersecurity
5.2: Evaluate the appropriateness of cybersecurity frameworks for developing a cybersecurity program to align with business needs.
MS Information Assurance & Cybersecurity
2.1: Evaluate the appropriateness of cybersecurity frameworks for developing a cybersecurity program to align with business needs.
![5. Write a program that implements a class called MyTeam. Your class should have the following private data items: Id (int), Name (string), Slogan (string), Wins (int), and Losses (int). You need to define properties with appropriate accessor functions for each of the data items. Methods should include a default constructor that sets values to the empty string or zero, a constructor that allows the user to specify all values for the data items, a member method called DisplayTeamInfo that outputs all the information for the given toy in a reasonable format. Challenge Problem: Code your set accessors to restrict all numeric fields (Id, Wins, Losses) to positive numbers. You can determine how you want to report/respond to the error. (25 pts) The code below is my suggestion for your Main() method for Program 22 static void Main(string[] args) { MyTeam myHitchhikers = new MyTeam(); myHitchhikers.Id = 42; myHitchhikers.Name = "Ford Prefect et. al."; myHitchhikers.Slogan = "Don't panic!"; myHitchhikers.Wins = 525; myHitchhikers.Losses = 42; Console.WriteLine("nTeam 1 Information"); myHitchhikers.DisplayTeamInfo(); MyTeam mykitties = new MyTeam(); Console.WriteLine("nTeall 2 Information"); mykitties.DisplayTeamInfo(); MyTeam myPatriots = new MyTeam(2023, "UC Patriots", "One Big Team", 42, 3); Console.WriteLine("nTeam 3 Information"); myPatriots.DisplayTeamInfo(); //This will test your Challenge Problem Settings if you attempted them Console.WriteLine("nTeam 4 Information"); MyTeam mywinners = new MyTeam(13, "Winners", "We like to win more than you do", -20, -35); } myllinners.DisplayTeamInfo();](https://gotit-pro.com/wp-content/uploads/2023/10/3e8c6678-946b-46ed-9c20-1515f2ff356a-324x229.png)
![Large Integers Part #1 Largelnteger Class An array can be used to store large integers, one digit at a time. For example, the integer 1234 could be stored in the array num by setting num[0] to 1, num[1] to 2, num[2] to 3, num[3] to 4. However, for this class implementation, you might find it more useful to store the digits backward; that is, place 4 in num[0], 3 in num[1], 2 in num[2], and 1 in num[3]. For the sake of simplicity, we will be storing and manipulating only with positive large integers. Implement a class named Largelnteger that stores a large integer as an array of its digits. Class must extend HasState class (provided). This is needed to make sure clone() method is written correctly. Class must have the following: - Fields - Constant arraySize must be set to 23 - Partially filled array of integers of length 23 - int digitCount keeps the number of digits in large integer, e.t. how many elements of the partially filled array are used to store the number - No-argument constructor that stores number 0 in the array. Sets digitCount to 1 - Constructor that takes a string as a parameter. The constructor parses the given string and converts it into Large Integer by storing digits in the partially filled array. - Create a new custom Exception class called LargelntegerNumberFormatException. The constructor throws exceptions of this type when - string is too long to be stored as a 23-digit number or - when string is empty or - when the string contains non-digits and thus cannot be converted into a number. - Constructor that takes a number of type long as a parameter and builds an object from it by storing digits in an array. - This constructor also throws a custom LargelntegerNumberFormatException when a parameter passed to the constructor is a negative number. - getDigitCount() accessor to the digit count variable. - toString() method that converts an array into a string of numbers in the correct order. Number 12345 is converted into a string "12345" - add(Largelnteger) method that returns the sum of this integer and the one passed as a parameter. The method adds two large integers by implementing the usual "paper and pencil" addition algorithm. This is when the backward storage arrangement of those numbers in arrays will pay off. Carry-over will be easier to do when the integer is stored backward. - Create another custom Exception class called LargelntegerOverflowException. If the resulting number is more than 23 digits long, the add() method throws a LargelntegerOverflowException type exception. - Implement clone() method. - Make your class implement Relatable interface. Code of the interface is provided. Implement all three methods of the Relatable interface. Part #2 Polymorphic Class This class exists only to house one static method called isSorted(). The method must take an array of objects of type Relatable and check if the array is sorted with the help of methods of Relatable interface. The method returns true if the array is sorted and false if it is not. The whole purpose of this exercise is to illustrate the concept of polymorphism. The purpose of this class is to house three static methods. 1. Method void writeLargelntegerArray(Largelnteger[], String) takes an array of Large Integers and a name of a file as parameters. The method writes the contents of the given array into the given binary file (in binary mode). The method throws IOExceptions. The IOExceptions may originate in the methods but must not be handled. Instead, they must be propagated to the calling code. - Make sure to add implements Serializable to the Largelnteger class header. Binary IO will fail to work without that. 2. Method Largelnteger[] readLargelntegerArray(String) method reads the contents of a binary file with the given name as an array of objects of type Largelnteger. Assume you do not know the amount of data in the file. Read data one Largelnteger object at a time and store the objects in ArrayList first. After the end of the file has been reached, convert the ArrayList into a regular array of objects that can be returned from the method. - Please study EOFDemo.java code example to learn how to use exceptions when checking for the end of the file while reading from a binary file. - This method also throws IOExceptions. The IOExceptions may originate in the methods but must not be handled. Instead, they must be propagated to the calling code. 3. Method Largelnteger addLargelntegersFromFile(String) takes a text file name as a parameter. It reads an arbitrary number of strings of text from the file, converting them into Largelntegers as it reads. The Large Integers are added one by one to the running total with the help of add() method. The sum of all the Large Integers stored in the file as strings is then returned from the method. - The structure of the file may be imperfect. Some strings may contain corrupted data and will fail to be converted into Largelnteger. This must not interrupt the process of reading from the file. The corrupted string must be skipped over, and the next string must be read and converted. Use a try/catch block to catch and ignore LargelntegerNumberFormatException. - The sum of all numbers stored in the file may become too big to be stored in a Large Integer. In that case, a LargeIntegerOverflowException exception will be thrown by the add() method. If this happens, catch the exception and return a null value from the method. - This method also throws IOExceptions. The IOExceptions may originate in the methods but must not be handled. Instead, they must be propagated to the calling code.](https://gotit-pro.com/wp-content/uploads/2023/10/a2443259-5cf9-45ff-9909-fdcfa036711f.png)
Bob Salerno –
Get detail and work done in a timely matter!
Carmen Hoggard –
thank you so much for everything
Edward Parker –
Amazing Job! would recommend to anyone who needs assistance!
Sabrina Turner –
Very happy with the help I got, I passed my exam!
Stephanie Specht –
Good and follow my each request, completed before due date. Strongly recommend it.